Evaluating Acoustics and Vibration in Buildings

Day One

Welcome and Student Introductions

 Architectural Sound Control – Room Acoustics

• Source Path Receiver
• Size, shape, materials
• Size versus wavelength
• NRC and limits
• Reflection / Absorption / Diffusion
• Small rooms
• Large rooms

 Architectural Sound Control – Acoustic Isolation

• Transmission paths (airborne, structure-borne)
• STC, CTC, OSTC and limits
• Open plan
• Enclosed rooms
• Transmission theory
• Mass law
• Double walls

 Acoustic Site-Specific Cases

• Office environment
• Retail and hospitality
• Residential housing
• Other occupancies
  • Schools
  • Hospitals
• Worship facilities
• Factories and industrial
• Outdoor considerations
• Research and Development labs
• Music practice and performance

Day Two

 Vibration Isolation of Mechanical Systems

• Isolation efficiency
• Specifications
• Rubber in shear connections
• Spring isolation and pipe hangers
• Pipe risers and thermal expansion
• Inertia blocks and concrete pads
• Flexible pipe connectors
• Rooftop AHU isolation
• Floating floors
• Building isolation

Seismic Restraint of MEP and FP Systems

• Specifications
• Building codes
• Connection types
• Housekeeping pads
• Pipe and duct braces
• Floor-mounted equipment bracing
• Suspended equipment bracing
• Fire Protection system bracing
• Testing

 The Hamel Music Center           

• Acoustic principles used in the design
• Overall introduction to the building
• Performance spaces
  • Recital Hall
  • Concert Hall
  • Rehearsal room
• Vibration isolation features
  • Design and procurement
  • Operations and maintenance
• Tour of the Hamel Music Center

Day Three

                 HVAC Design Considerations

• Why building acoustics?
• Source-Path-Receiver (SPR) model
• HVAC equipment sound ratings
• Airside noise control
  • Fans
  • Packaged air-handlers
• Air path attenuation
  • Ductwork
  • Elbows and fittings
  • Silencers
• In-duct turbulence generated noise
• Duct breakout
• Terminal units
• Grilles, Registers & Diffusers (GRD)
• Mechanical equipment room design
• Outdoor noise control
  • Rooftops
  • Cooling towers
• Special equipment vibration topics
  • Multiple direct-drive fans
  • Internal vs. external isolation
  • Inertial bases

Registration Date/Time:
10/14/2025 8:30am Central Time

Event Dates/Times:

• 10/14/2025  9:00am - 5:00pm Central Time
• 10/15/2025  9:00am - 5:00pm Central Time
• 10/16/2025  9:00am - 4:00pm Central Time

• Program Director

  Mark Malkin

• Richard Talaske

  Principal Acoustics Consultant

  Rick Talaske, FASA, is the President and Principal Acoustics Consultant for TALASKE | SOUND THINKING in Oak Park, Illinois. During his 38+ years as a practicing acoustical consultant, he has worked nationally and internationally on the design or evaluation of hundreds of performance facilities. Rick is the acoustician of the new Mead Center on UW-Madison’s campus, that will be presented in the course and includes a concert hall, recital hall, and instrumental rehearsal room. Rick is a Fellow of the Acoustical Society of America and a past Chair of ASA’s Technical Committee on Architectural Acoustics. He is a graduate of University of Michigan (B.S. in Engineering, 1976) and Pennsylvania State University (M.S. in Acoustics 1979).

• James Tauby

  Chief Executive Engineer

  James R. Tauby, P.E. is Chief Executive Engineer for Mason Industries in Hauppauge, NY, a worldwide leader in the field of noise and vibration control products as well as seismic and wind restraint systems. He regularly lectures around the world on topics ranging from vibration isolation and seismic and wind restraint of mechanical systems to the use of elastomeric expansion joints for piping in seismic applications. Jim has been a featured speaker at ASPE and ASHRAE National Conventions numerous times, is an ASHRAE Distinguished Lecturer, and has received the Distinguished Service Award from ASHRAE. He is a past chairman of ASHRAE’s Technical Committee TC-2.7, “Seismic and Wind Restraint Design,”and he is currently the chairman of ASHRAE standards committee SPC 171P, “Method of Test of Seismic Restraints for HVAC & R Equipment.” Jim is a registered professional engineer in 45 states, the District of Columbia, and in New Zealand, and holds a Bachelor’s of Science in Mechanical Engineering from the University of Alabama.

• Curtis Eichelberger

  Principal

  Curtis Eichelberger, PE, is the Principal of Eichelberger Acoustics in Harrisburg PA, after working at the Johnson Controls Design Center where he was involved with the design and application of HVAC airside equipment. He has over 40 years experience in research, engineering and application of products relating to acoustic and vibration technologies. Before joining Johnson Controls, he was employed in a variety of positions with Emerson and Bruel & Kjaer instruments, where he was responsible for the application of acoustic and vibration measurement systems. Early in his career, he managed a noise control group with Gannet Fleming Consulting Engineers where he was responsible for over seventy projects relating to building noise and vibration control. Curt is a member of the Institute of Noise Control Engineering (INCE), and ASHRAE where he is presently serving on the Research Administration Committee and is an instructor with the ASHRAE Learning Institute. Curt received his B.S. in Electrical Engineering and M.S. in Acoustics from the Pennsylvania State University.

If you are planning to attend an Interdisciplinary Professional Programs course, payment is required at the time of registration. Below are the payment options:

Pay by Credit Card

Enroll online and pay by credit card.

• Search for the course on the website and then click on the Enroll Now button from the course webpage.
• Enter all necessary course attendee information and payment information on the course enrollment page.
• You will receive an email to confirm successful enrollment and payment.

Enroll over the phone and pay by credit card.

• Call CERC Registrations at 608-262-2451.
• Provide the registrations representative with:
  • the course name, dates, and/or course number.
  • the necessary course attendee information and payment information.
• You will receive either a mailed document or an email to confirm successful enrollment payment.

Pay by Check

Mail in a completed registration form and check payable to UW Madison.

• Fill out a registration form (found either in the back of the course brochure you received in the mail or here).
• Prepare a check, made payable to UW Madison.
• Mail the registration form and check to: CERC Registrations 21 N Park St, Ste 7101 Madison, WI 53715
• You will receive either a mailed document or an email to confirm successful enrollment and payment.

Pay by Purchase Order

• Request Purchase Order information from interpro@union.wisc.edu
  • If a fee quote is needed, contact custserv@interpro.wisc.edu first
• You will receive an invoice from UW–Madison Business Services for payment, usually within 3–5 business days

Military

If using SF-182 form, please call our registration number at 608-262-2451 or email interpro@union.wisc.edu for details and instructions.

Event Cancellation

We reserve the right to cancel a course due to insufficient enrollment or unforeseen events. If we cancel a course, participants will be notified via email or phone and will be given the option for a full refund or to transfer their registration and any fees paid to another course. We are not responsible for non-refundable plane tickets, hotel reservations, and other travel related expenses. For enrollee Course Cancellation, refer to notes on course page.

If you cannot attend, please notify us no later than one week before your course begins, and we will refund your fee. Cancellations received after this date and no-shows are subject to a $150 administrative fee. You may enroll a substitute at any time before the course starts.