HVAC Applications

Fee covers: morning and afternoon breaks, scheduled lunches, and course materials

Review of HVAC Systems

• Abbreviations and references
• Survey of ASHRAE standards
• Use of a psychrometric chart
• Weather data and climate
• Vapor compression refrigeration
• Chilled water system components

Indoor Swimming Pools

• Wall construction / fenestration
• Duct designs
• Chemistry
• Exhaust
• Load calculations
• Equipment

Ice Skating Rinks

• Facility construction
• Conditions for various surfaces
• Load calculations and equipment

Laboratories

• 2023 HVAC Applications – Chapter 17
• Equipment requirements
• Laboratory ventilation
• Chemical fume hood testing
• Exhaust fans and air dispersion
• Energy conservation measures

Healthcare

• Healthcare codes and standards
  • 2023 HVAC Applications – Chapter 9
  • FGI – Facility / Guidelines Institute
  • ASHRAE 170 – Ventilation of Health Care Facilities
  • NFPA 99 – Health Care Facilities Code
• Examples of requirements
  • Infection Control Risk Assessment (ICRA)
  • Water treatment and circulation
  • Indoor Air Quality and air filtration
  • Air pressurization requirements
  • Humidity requirements
    • Steam humidification
    • Adiabatic humidification
  • Emergency power / Standby
• Authorities Having Jurisdiction
  • Governing agencies
• Facility types
  • Hospitals
  • Outpatient facilities
  • Nursing homes and residencies
• Healthcare specific design considerations by space type

Museums and Libraries

• 2023 HVAC Applications – Chapter 24
• Temperature and relative humidity
• Material preservation considerations
• Collection storage and display

Data Centers

• 2023 HVAC Applications – Chapter 20
• ASHRAE thermal guidelines
• ASHRAE Standards 90.1 and 90.4
• Airflow configurations
• CRAC and CRAH units
• Liquid cooled equipment
• Air and water-side economizers

Indoor Plant Growth

• Purpose of growing indoors
• Plant physiology and Vapor Pressure Deficit (VPD)
• Facility construction
• Loads
  • Lighting
  • Evapotranspiration
• Outdoor air use
• CO₂ supplementation
• Controls and psychrometrics of indoor plant growth
• Duct designs and air distribution
• Equipment
  • Types
  • Redundancy
  • Remote monitoring and security
  • Humidification
  • Commissioning and PM

Net-Zero Energy Buildings

• Definition (ASHRAE Standard 228)
  • Site boundary
  • Different fuel types and source energy
  • Net-Zero carbon buildings – what is the difference?
• Process
  • Defining and setting goals
  • Conservation and generation
  • Operation
• Solar basics
  • Photovoltaic (PV)
  • Solar thermal
• Case study (Wisconsin school)

Registration Date/Time:
10/28/2025 8:0am Central Time

Event Dates/Times:

• 10/28/2025  8:30am - 4:30pm Central Time
• 10/29/2025  8:30am - 4:30pm Central Time
• 10/30/2025  8:30am - 4:00pm Central Time

• Instructors

  Deanne Walz

  Project Manager

  Deanne is a Project Manager at Affiliated Engineers, a national MEP engineering consulting firm with 16 offices. She began her career in the firm’s Washington, DC office, where she contributed mechanical design expertise to several projects at the National Institutes of Health. Now based in Madison, Deanne focuses on healthcare projects, currently leading the design of a new 332,000-square-foot hospital for Bay Area Medical Center in Marinette, Wisconsin. Her recent work also includes MEP and utility infrastructure planning for Froedtert Hospital in Milwaukee and the mechanical design of a 452,000-square-foot expansion at Alfred I. duPont Hospital for Children in Delaware. Deanne is a licensed professional engineer and a LEED Accredited Professional, bringing a strong commitment to sustainable and high-performance building design.

  Mark Malkin

  Program Director and Teaching Faculty

  Mark P. Malkin, PE, is a program director in the Office of Interdisciplinary Professional Programs in the College of Engineering at UW-Madison. He is a registered Professional Engineer with over 25 years of experience in university facilities project management and HVAC systems design. His course offerings include HVAC, plumbing and fire protection fundamentals, building code reviews, and design and operation of science labs, data centers, museums and libraries. Mark received his bachelor's in Mechanical Engineering from Cornell University, and his MS in Mechanical Engineering from UW–Madison.

  Craig Burg

  President

  Craig Burg is the Vice President of Engineering at Desert Aire LLC, where he has led product development and application engineering efforts for over two decades. He currently oversees research and development, custom system engineering, product testing, manufacturing engineering, and quality assurance. Craig holds a degree in Mechanical Engineering from the Milwaukee School of Engineering and is an active member of ASHRAE, where he serves in multiple leadership roles, including chairing ASHRAE SPC 198. He also contributes to industry standards through his involvement with AHRI and ASABE. With experience designing a wide range of air conditioning and dehumidification systems—from residential to large-scale commercial—Craig brings deep technical expertise to the field. He holds two patents, with additional innovations pending, focused on efficient vapor compression cycles and air reheating technologies.

  Svein Morner

  Principal, Leader

  Dr. Svein Morner is a founding principal of Sustainable Engineering Group, now part of HGA, where he brings over 20 years of expertise in commissioning, retro-commissioning, and energy efficiency engineering. He has served as a Commissioning Authority for a wide range of commercial, institutional, and governmental buildings, helping to implement high-performance, environmentally responsible design strategies. Dr. Morner has led research in solar energy and energy storage and was instrumental in developing the ASHRAE Design Guide for Dedicated Outdoor Air Systems (DOAS) and the ASHRAE Laboratory Design Guide. He earned his Mechanical Engineering degrees from the Norwegian University of Science and Technology and completed a postdoctoral fellowship at the University of Wisconsin. An active member of ASHRAE, he contributes to technical committees focused on sustainability, solar energy, and commissioning. Dr. Morner is recognized for advancing quality procedures and policies that support energy-efficient building design and operation.

  Samuel Butzer

  Senior Mechanical Project Engineer

  Samuel Butzer, PE, is a Senior Mechanical Project Engineer at HGA in Milwaukee, specializing in mechanical systems for healthcare facilities. With 20 years of experience, he brings a problem-solving mindset and a holistic approach to design. His recent projects include the UW Health East Madison Hospital Expansion and the Cleveland Clinic Cole Eye Institute. Samuel is a licensed Professional Engineer and a LEED Accredited Professional (BD+C), committed to delivering sustainable, high-performance solutions that support patient care and operational excellence.

• Program Director

  Mark Malkin

20% off for UW FP&M

If you are planning to attend an Interdisciplinary Professional Programs course, payment is required at the time of registration. Below are the payment options:

Pay by Credit Card

Enroll online and pay by credit card.

• Search for the course on the website and then click on the Enroll Now button from the course webpage.
• Enter all necessary course attendee information and payment information on the course enrollment page.
• You will receive an email to confirm successful enrollment and payment.

Enroll over the phone and pay by credit card.

• Call CERC Registrations at 608-262-2451.
• Provide the registrations representative with:
  • the course name, dates, and/or course number.
  • the necessary course attendee information and payment information.
• You will receive either a mailed document or an email to confirm successful enrollment payment.

Pay by Check

Mail in a completed registration form and check payable to UW Madison.

• Fill out a registration form (found either in the back of the course brochure you received in the mail or here).
• Prepare a check, made payable to UW Madison.
• Mail the registration form and check to: CERC Registrations 21 N Park St, Ste 7101 Madison, WI 53715
• You will receive either a mailed document or an email to confirm successful enrollment and payment.

Pay by Purchase Order

• Request Purchase Order information from interpro@union.wisc.edu
  • If a fee quote is needed, contact custserv@interpro.wisc.edu first
• You will receive an invoice from UW–Madison Business Services for payment, usually within 3–5 business days

Military

If using SF-182 form, please call our registration number at 608-262-2451 or email interpro@union.wisc.edu for details and instructions.

Event Cancellation

We reserve the right to cancel a course due to insufficient enrollment or unforeseen events. If we cancel a course, participants will be notified via email or phone and will be given the option for a full refund or to transfer their registration and any fees paid to another course. We are not responsible for non-refundable plane tickets, hotel reservations, and other travel related expenses. For enrollee Course Cancellation, refer to notes on course page.

If you cannot attend, please notify us no later than one week before your course begins, and we will refund your fee. Cancellations received after this date and no-shows are subject to a $150 administrative fee. You may enroll a substitute at any time before the course starts.