Landfill Gas Design and Management

Day 1 - Introduction and Principles

Keynote: Landfill Gas from State-of-Practice to State-of-Art

• Historical Perspectives, Contain-Collect-Control
• Evolving Standard-of-Practice, Risks and Opportunities

Chemical Characteristics and Fundamentals

• Biological Decomposition and Chemical Reactions
• Conditions for Gas Generation, Characteristics of LFG
• Heath and Safety

Developing a Sustainable Waste Management Campus and Circular Landfill

• Life-cycle systems
• Developing a Sustainability Campus
• Opportunities to Improve the Sustainability of Waste Management

Afternoon Site Tour

• Landfill Gas Collection
• Well Head Automation, Machine Learning
• UAC Survey Demonstration, Noxious/Nuisan Gas Control
• High-BTU Conversation Plant Tour
• Emission Sensor Network

Day 2- Landfill Gas System Design

Estimates of Landfill Gas Generation and Emissions

• Factors impacting Quantity and Composition
• USEPA Land GEM, IPCC Waste Model, Canada Provincial...

Measurement of Fugitive Emissions

• Transport Mechanisms
• Qualitative Methane Reconnaissance Techniques
• Surface flux chambers, Tracer Gas Dispersion, Mass balance
• UAV-Borne Sensor Array
• Landfill Data Collection Procedures
• Time-lape Mapping

Extraction and Collection Systems Design, 2 parts

• Vertical Extraction Wells versus Horizontal Collectors
• Radius of Influence Calculations and Measurements
• Well Heads: solar power, metering, valving, automation
• Layout of Headers, Laterals, Valves, Sumps...
• Aucillary Components: Pneumatic Air Systems, Force Mains, Electrical Service
• Blower Station and Flare Design, Flares, Metering        

Day 3-Collection, Recovery, Treatment, and Marketing

Header Pipe Sizing and Layout

• System Desing Methods: LP Mueller, Darey, KY Gas
• Design Steps and Considerations

Landfill Gas Markets and Biogas Economics

• The RNG Market, Carbon Markets
• Roles in RNG Projects
• Financial Considerations and Clean Fuel Incentives
• Renewable Fuel Standards
• Income and Expenses Streams
• Market Analysis, Compliance, and Tracking Credits

Biogas Cleanup Technologies

• Biogas Characteristics and Constituents
• Membrane System
• Pressure Swing Absorption Systems
• Solvent/Water based Systems
• Cryogenic Systems
• System Economics

Pipeline-Grade High-BTU Gas Conversion

• Economics, Ownership Structures, Financial Pro Forma
• Equipment Selection and Design, Interconnection, Offtake Agreements
• Engineering, Pipeline Access, Financing, Environmental Markets
• Technology Choices for Biogas Upgrading
• Contractual Considerations, Construction Delivery Methods
• Commissioning and Operations

Small Scale Biogas to CNG Vehicle Fuel Projects

• Biogas Quality and Quanity
• Vehicle Fuel Requirements (SAE J1616)
• Small Scale Biogas Cleanup Technologies
• CNG Fueling Station Options
• Project Economics

Evolving Topics in LFG Operations and Management

• EVOH Geomembranes, Duel Extraction Wells, Black Goo
• Odor Control, Elevated Temperature Landfills
• Machine Learning

Registration Date/Time:
4/9/2025 7:30am Central Time

Event Dates/Times:

• 4/9/2025  8:00am - 4:00pm Central Time
• 4/10/2025  8:00am - 5:15pm Central Time
• 4/11/2025  8:00am - 4:20pm Central Time

• Program Director

  James Tinjum

• Orhun Aydin

  Assistant Professor

• C. Lee Daigle

  Client Manager

  Lee Daigle is a registered professional engineer in civil engineering with 25 years of experience in the landfill gas industry. Mr. Daigle started his career as an intern at a municipal solid waste landfill in Colonie, New York while attending Rensselaer Polytechnic Institute. While interning, he was fully immersed in the operations, maintenance, and construction of landfill gas collection and control systems, which instilled him with a passion for the industry. Upon graduation, Mr. Daigle continued to focus on landfill gas, and expanded his expertise in landfill gas utilization feasibility assessment, design, regulatory compliance, construction, and operations. Mr. Daigle has worked on landfill gas collection systems in over 30 states/territories, three Canadian provinces, and several countries abroad. He has been responsible for the initial start-up and monitoring of collection and control systems and has performed data analysis and interpretation to assist in optimizing overall landfill gas system performance. He also performed construction management and construction quality assurance (CQA) services during the installation of numerous landfill gas extraction and treatment systems, giving him a strong understanding of the construction issues associated with the implementation of cost-effective landfill gas system designs. Since 2011, Mr. Daigle has expanded his practice into all areas of solid waste design including the design and permitting of municipal solid waste cells and closures. Recently, Mr. Daigle has been elected to the Solid Waste Association of North America's Board of Directors, Wisconsin Badger Chapter and currently serves as Vice President of the board.

• Sean Gassen

  CARBON CONSULTING MANAGER FOR RNG

• Alicia Jones

  DIRECTOR OF COMPLIANCE CONSULTING

• Adam Klaas

• James Tinjum

  associate professor

  James M. Tinjum, PE, PhD, F.ASCE, is an Associate Professor and outgoing Director of the Geological Engineering Program at the University of Wisconsin–Madison. Dr. Tinjum has 35 years of solid waste experience, beginning in 1990. Prior to his engagement as a faculty member at UW–Madison in 2008, he worked for 15 years in industry for prominent engineer-procure-construct firms and a Fortune 50 company. He has specialized technical knowledge in geoenvironmental and remediation engineering for landfills with industrial waste (lime kiln dust, cement kiln dust, foundry residuals, paper mill sludge, coal combustion residuals), municipal solid waste (particularly landfill liner and cover systems and the monitoring, recovery, and value-added use of landfill gases), and hazardous waste. He conducts research in waste geotechnics and waste containment systems; the beneficial reuse of industrial byproducts (e.g., for subgrade improvement and cementitious stabilization of pavement layers); life cycle environmental analysis of geo systems; remediation of contaminated sites; and fate and transport of landfill gas emissions. Dr. Tinjum developed these interests not only through industry practice and applied research, but also through discussions and interactions with practitioners participating in his nationally/internationally attended engineering short course programs. In applied practice, Dr. Tinjum has participated in nearly 100 solid waste projects. 

• Erica Majumder

  Assistant Professor of Bacteriology

If you are planning to attend an Interdisciplinary Professional Programs course, payment is required at the time of registration. Below are the payment options:

Pay by Credit Card

Enroll online and pay by credit card.

• Search for the course on the website and then click on the Enroll Now button from the course webpage.
• Enter all necessary course attendee information and payment information on the course enrollment page.
• You will receive an email to confirm successful enrollment and payment.

Enroll over the phone and pay by credit card.

• Call CERC Registrations at 608-262-2451.
• Provide the registrations representative with:
  • the course name, dates, and/or course number.
  • the necessary course attendee information and payment information.
• You will receive either a mailed document or an email to confirm successful enrollment payment.

Pay by Check

Mail in a completed registration form and check payable to UW Madison.

• Fill out a registration form (found either in the back of the course brochure you received in the mail or here).
• Prepare a check, made payable to UW Madison.
• Mail the registration form and check to: CERC Registrations 21 N Park St, Ste 7101 Madison, WI 53715
• You will receive either a mailed document or an email to confirm successful enrollment and payment.

Pay by Purchase Order

• Request Purchase Order information from interpro@union.wisc.edu
  • If a fee quote is needed, contact custserv@interpro.wisc.edu first
• You will receive an invoice from UW–Madison Business Services for payment, usually within 3–5 business days

Military

If using SF-182 form, please call our registration number at 608-262-2451 or email interpro@union.wisc.edu for details and instructions.

Event Cancellation

We reserve the right to cancel a course due to insufficient enrollment or unforeseen events. If we cancel a course, participants will be notified via email or phone and will be given the option for a full refund or to transfer their registration and any fees paid to another course. We are not responsible for non-refundable plane tickets, hotel reservations, and other travel related expenses. For enrollee Course Cancellation, refer to notes on course page.

If you cannot attend, please notify us no later than one week before your course begins, and we will refund your fee. Cancellations received after this date and no-shows are subject to a $150 administrative fee. You may enroll a substitute at any time before the course starts.