Low-Slope Roofing Systems

Day One

Welcome and Student Introductions

Roof Decks and Wind Design Basics

• Roof deck types and design
• Steel roof deck profiles
• Concrete roof decks
• Wood roof decks (e.g., plywood, OSB, wood plank, wood boards)
• Wind load calculations
• ASCE 7 wind load design
• FM Global and FM Approval wind design methods

Bituminous Membrane Roof Systems

• Evolution of bituminous roof systems
• Water-shedding/shingling effect
• Redundancy
• Roof slope limitations and backnailing
• Built-up roof (BUR) membrane systems:
  • Components
  • Application Methods
  • Membrane configurations
  • Surfacings
• Polymer-modified bitumen membrane roof systems:
  • Bitumen modifier types and characteristics
  • Components
  • Application Methods
  • Membrane configurations
  • Surfacings
• Repair and maintenance

Single-ply Membrane Roof Systems

• Evolution of single-ply membrane roof systems
• General installation/attachment methods (e.g., adhered, attached, ballasted)
• Roof slope
• Membrane types (e.g., EPDM, TPO, PVC, KEE, other membranes)
  • Chemistry
  • Material properties/performance attributes
  • Installation/attachment techniques (e.g., (lap seams, membrane flashings)
• Surfacings (e.g., aggregate ballast, pavers)
• Repair and maintenance

Liquid-applied Membrane Systems

• Evolution of liquid-applied membrane roof systems
• General installation methods
• Roof slope
• Membrane types (e.g., hot-rubberized asphalt, PMMA)
  • Chemistry
  • Material properties/performance attributes
  • Installation/attachment techniques (e.g., (lap seams, membrane flashings)
  • Liquid flashings
• Surfacings
• Repair and maintenance

Roof coatings

• Purpose of roof coatings
• Coating types (e.g., acrylic, silicone)
  • Chemistry
  • Material properties/performance attributes
• Application methods

Day Two:

Roof Insulation

• Purpose of insulation
• Above-deck insulation vs. below-deck insulation
• Insulation types:
  • R-values
  • Properties
  • Limitations
• Insulation attachment
• Insulation coverboards
• Energy Code requirements
  • IECC 2024 for insulation above-deck configurations

Codes and Standards

• History of code and standards
• Standard organizations (e.g., ASTM, FM, UL)
• Fire testing and classification ratings
• International Code Council (ICC)
• International Building Code, 2021 Edition:
  • Wind
  • Fire
  • Prescriptive requirements
  • Reroofing
• Other codes applicable to roofing

Moisture Mechanics and Air and Vapor Control

• Introduction
• Moisture mechanics of materials
• Vapor retarder design
• Air retarder design
• Avoiding moisture problems
• Moisture surveys

Roof Details

• Detail types (e.g., gravel stop, fascia, coping, counterflashing, roof penetrations)
• Flashing materials (e.g., membranes, liquids, metal)
• Manufacturers’ standard details
• NRCA Construction Details
• SMACNA details (metal configurations)
• Use of sealants

 Warranties and Maintenance and Repair

• Building owner responsibilities
• Types of warranties and guarantees
• Manufacturer-contractor applicator agreements
• Examples of warrantee provisions limiting coverage
• Building owner-responsible maintenance and repair
• Establishing a roof maintenance program

Open Discussion and Q & A with Speakers

Registration Date/Time:
12/2/2025 7:30am Central Time

Event Dates/Times:

• 12/2/2025  8:00am - 4:30pm Central Time
• 12/3/2025  8:00am - 4:30pm Central Time

• Instructors

  Matthew Dupuis

  President - Structural Research Inc.

  Matt Dupuis is a licensed Professional Engineer with more than 15 years of experience. His area of specialization lies within moisture movement, temperature modeling, solar reflectivity, research and failure analysis. He has worked in the United States and internationally. His experience includes waterproofing and steep roof assemblies, as well as developing and teaching BIM courses at the University of Wisconsin-Madison Civil Engineering Department. He has contributed to numerous publications and articles, in addition to presenting topics on roof temperatures and hygrothermal modeling at various roofing symposia, as well as the International Roofing Expo, MRCA, SPRI, and RCI.

  Helene Pierce

  Helene pierce has spent over 40 years in the roofing industry and has been very active in many of the industry’s organizations.  She received the ASTM Award of Merit and title of Fellow from ASTM Committee D08 on Roofing, Waterproofing and Bituminous Materials, the James Q. McCawley award from the Midwest Roofing Contractors Association, and the title of Fellow of the Institute from the Roof Consultants Institute.  In 2019, Helene received the J.A. Piper award from the National Roofing Contractors Association, the industry’s highest recognition for service to the NRCA and the industry. She served on the Board of Directors for ASTM from 1999-2002 and then on ASTM’s Executive Board as Chairman of the Finance and Audit Committee in 2003.

  Among the many groups in which she has been active are the Asphalt Roofing Manufacturers Association (ARMA); ASTM International; the Construction Specifications Institute (CSI); the National Roofing Contractors Association (NRCA); the Polyisocyanurate Insulation Manufacturers Association (PIMA); the International Institute of Building Enclosure Consultants (IIBEC); IIBEC Foundation Board of Directors; Single Ply Roofing Institute; Roofing Industry Educational Institute (RIEI); and the Cool Roofs Rating Council (CRRC).  Helene has also authored and presented numerous papers for the roofing industry and is a frequent contributor to industry publications. 

  David Tilsen

  President - Tilsen Roofing Co., LLC.

  David J. Tilsen is the President of Tilsen Roofing Company, Inc., which provides contracting services on commercial, industrial, and institutional low-slope and residential steep slope roofs, while specializing in built-up, single ply, modified bitumen, metal, asphalt and wood shingle roofing and offers roof maintenance and roof management programs. Tilsen is a past vice president of the NRCA and a past president of the Wisconsin Roofing Contractors Association and the Midwest Roofing Contractors Association. He currently serves on the NRCA Technical Operations Committee.

  Mark Graham

  Vice President, Tech Services - National Roofing Contractors Association

  Mark Graham is an experienced project engineer with expertise in the investigation, design, and repair of roof and waterproofing systems. With National Roofing Contractors Association (NRCA), he is responsible for developing and maintaining his association’s technical documents including the NRCA Roofing and Waterproofing Manual. Graham is also a contributing editor to Professional Roofing Magazine, as well as an active member of ASTM’s Roofing and Waterproofing, Thermal Insulation, Fire Standards, and Performance of Buildings Committees. Other memberships include ASHRAE, International Code Council and NFPA.

• Program Director

  Mark Malkin

Fee covers morning and afternoon breaks, scheduled lunches, and course materials

Enroll in both this course and D573 Metal Roofing Systems to receive $100 off each course.

If you are planning to attend an Interdisciplinary Professional Programs course, payment is required at the time of registration. Below are the payment options:

Pay by Credit Card

Enroll online and pay by credit card.

• Search for the course on the website and then click on the Enroll Now button from the course webpage.
• Enter all necessary course attendee information and payment information on the course enrollment page.
• You will receive an email to confirm successful enrollment and payment.

Enroll over the phone and pay by credit card.

• Call CERC Registrations at 608-262-2451.
• Provide the registrations representative with:
  • the course name, dates, and/or course number.
  • the necessary course attendee information and payment information.
• You will receive either a mailed document or an email to confirm successful enrollment payment.

Pay by Check

Mail in a completed registration form and check payable to UW Madison.

• Fill out a registration form (found either in the back of the course brochure you received in the mail or here).
• Prepare a check, made payable to UW Madison.
• Mail the registration form and check to: CERC Registrations 21 N Park St, Ste 7101 Madison, WI 53715
• You will receive either a mailed document or an email to confirm successful enrollment and payment.

Pay by Purchase Order

• Request Purchase Order information from interpro@union.wisc.edu
  • If a fee quote is needed, contact custserv@interpro.wisc.edu first
• You will receive an invoice from UW–Madison Business Services for payment, usually within 3–5 business days

Military

If using SF-182 form, please call our registration number at 608-262-2451 or email interpro@union.wisc.edu for details and instructions.

Event Cancellation

We reserve the right to cancel a course due to insufficient enrollment or unforeseen events. If we cancel a course, participants will be notified via email or phone and will be given the option for a full refund or to transfer their registration and any fees paid to another course. We are not responsible for non-refundable plane tickets, hotel reservations, and other travel related expenses. For enrollee Course Cancellation, refer to notes on course page.

If you cannot attend, please notify us no later than one week before your course begins, and we will refund your fee. Cancellations received after this date and no-shows are subject to a $150 administrative fee. You may enroll a substitute at any time before the course starts.