Process Hazard Analysis Emphasizing Ammonia Refrigeration Systems

Day 1

Welcome

Introduction to Process Hazard Analysis

• Hazards – what they are and how to identify them
• PHA regulatory requirements
• When and why should you conduct hazard evaluations or analyses?
• OSHA interpretations on PHAs

Preparing for a PHA

• How to define PHA objectives and scope
• Staffing
• Information requirements
• Strategies to effectively engage all PHA participants

Critical Factors to Include in PHAs

• Human factors
• Facility siting
• Failure of engineering and administrative controls (safeguards)
• How to account for all operating scenarios

Workshop (Human Factors-Related)

P&IDs -Their Role in the PHA Process

• Purpose of P&IDs
• Characteristics of effective P&IDs
• Role of P&IDs in the PHA process

Management of Change (MOC)

• How changes impact the process hazard analysis
• “Change” vs. “replacement in-kind”
• Types of changes that should trigger a PHA
• OSHA interpretations on MOCs that lead to PHAs

Day 2

Overview of PHA Methodologies

• What-if/Checklist
• Hazard and Operability Study/Analysis (HAZOP)
• Failure Mode and Effects Analysis (FMEA)
• Fault tree analysis
• Advantages, disadvantages, and limitations of each methodology
• Importance of matching the PHA methodology to the complexity of the process

How to Conduct a PHA Using the What-if/Checklist Methodology

• Identify PHA objectives, scope, and subsystems
• Gather required information as input to the process
• Develop and modify the What-if/Checklist
• Rank risks and how risk impacts requirements for recommendations
• Document the PHA process and findings
• Pitfalls
• Preview of What-if/Checklist workshop

What-if/Checklist Workshop

Given appropriate preliminary documentation (P&IDs, photos, etc.), you will work in groups to define PHA objectives and subsystems for analysis, review given information, modify the What-if/Checklist, and complete a first-cut of a hazard evaluation list. Representatives from each group will present their PHA objective(s) and What-if/Checklist modifications.

Site Visit-Engine Room Walk-thru

Day 3

What-if/Checklist Workshop – (Continues)
Each group conducts a mock PHA using their What-if/Checklist.

What-if/Checklist Workshop Closeout

Roundtable discussion of site visit and PHA using the What-if/Checklist methodology

PHA Revalidation

• Revalidation requirements
• Planning for revalidation
• Redo, update, revise and revalidate-what’s the difference?
• How to conduct and document the PHA revalidation

Action Required Following a PHA

• Determine actionable recommendations
• Resolution of PHA action items
• Prioritization
• Management response
• Communication of findings

PHA Process Quality Improvement

• Post-mortem evaluation of a PHA session
• Strategies to achieve PHA process improvement

This course is part of the Process Safety Management Professional Certificate. Enhance your ability to manage PSM and RMP programs for ammonia refrigeration facilities while earning a recognized credential. For added flexibility, this course can be taken individually to suit your needs.

Participants can also earn a digital badge, showcasing their mastery of course material and demonstrating their professional growth. These micro-credentials are awarded upon successful completion of an online final quiz, providing tangible evidence of your achievement and commitment to excellence in process safety. Take this opportunity to bolster your skills and advance your career.

• 9/24/2025  08:30am - 04:00pm
• 9/25/2025  08:30am - 04:00pm
• 9/26/2025  08:30am - 02:00pm

All times listed are Central Time Zone.

• Program Director

  Douglas Reindl

• Marc Claas

  Researcher

  Marc Claas is an Associate Researcher with the Industrial Refrigeration Consortium, specializing in industrial refrigeration since 2009. He focuses on system maintenance, safe operation, troubleshooting, and regulatory compliance, with a growing interest in emerging cooling technologies. Marc has led online operator training programs and brings extensive field experience in Process Safety Management (PSM), including audits and Process Hazard Analyses (PHAs). He also investigates energy efficiency and operational improvements in refrigeration systems. Marc holds a B.S. in Mechanical Engineering from UW-Platteville and an M.S. in Mechanical Engineering with a focus on Thermal Sciences from UW-Madison. He is an active member of the International Institute of Ammonia Refrigeration.

• Todd Jekel

  Assistant Director

  Todd Jekel, PhD, PE is the Assistant Director of the Industrial Refrigeration Consortium (IRC) at the University of Wisconsin–Madison, where he leads applied research and technical outreach in industrial refrigeration. His work focuses on system and component modeling, refrigeration load and energy calculations, accumulator design, and safety relief vent systems. Dr. Jekel has contributed to the development and instruction of several web-based and in-person courses for refrigeration professionals, covering topics such as ammonia refrigeration, process safety, and energy efficiency. He holds degrees from Calvin College and the University of Wisconsin–Madison. In addition to his academic and research roles, he is an active member of ASHRAE and the International Institute of Ammonia Refrigeration (IIAR), serving on multiple technical committees. Dr. Jekel is recognized for his expertise in vessel design, oil separation, and dehumidification strategies for cold storage facilities.

• Douglas Reindl

  Professor

  Douglas Reindl, PhD, PE is a professor in the Department of Mechanical Engineering and a Program Director at the Office of Interdisciplinary Professional Programs at the University of Wisconsin–Madison. He brings extensive expertise in mechanical systems, with a particular focus on industrial ammonia refrigeration. As the founding director of the Industrial Refrigeration Consortium, Dr. Reindl is dedicated to advancing the safety, efficiency, and reliability of refrigeration infrastructure. He holds a BS in Mechanical Engineering Technology from the Milwaukee School of Engineering, and both MS and PhD degrees in Mechanical Engineering from UW–Madison. A registered professional engineer in Wisconsin, Dr. Reindl is widely recognized for his leadership in refrigeration education and applied research.

This course is part of the Process Safety Management Professional Certificate. Increase your knowledge and effectiveness at managing PSM/RMP programs for your ammonia refrigerated facility, while earning a recognized credential. Course can be taken individually as well.

If you are planning to attend an Interdisciplinary Professional Programs course, payment is required at the time of registration. Below are the payment options:

Pay by Credit Card

Enroll online and pay by credit card.

• Search for the course on the website and then click on the Enroll Now button from the course webpage.
• Enter all necessary course attendee information and payment information on the course enrollment page.
• You will receive an email to confirm successful enrollment and payment.

Enroll over the phone and pay by credit card.

• Call CERC Registrations at 608-262-2451.
• Provide the registrations representative with:
  • the course name, dates, and/or course number.
  • the necessary course attendee information and payment information.
• You will receive either a mailed document or an email to confirm successful enrollment payment.

Pay by Check

Mail in a completed registration form and check payable to UW Madison.

• Fill out a registration form (found either in the back of the course brochure you received in the mail or here).
• Prepare a check, made payable to UW Madison.
• Mail the registration form and check to: CERC Registrations 21 N Park St, Ste 7101 Madison, WI 53715
• You will receive either a mailed document or an email to confirm successful enrollment and payment.

Pay by Purchase Order

• Request Purchase Order information from interpro@union.wisc.edu
  • If a fee quote is needed, contact custserv@interpro.wisc.edu first
• You will receive an invoice from UW–Madison Business Services for payment, usually within 3–5 business days

Military

If using SF-182 form, please call our registration number at 608-262-2451 or email interpro@union.wisc.edu for details and instructions.

Event Cancellation

We reserve the right to cancel a course due to insufficient enrollment or unforeseen events. If we cancel a course, participants will be notified via email or phone and will be given the option for a full refund or to transfer their registration and any fees paid to another course. We are not responsible for non-refundable plane tickets, hotel reservations, and other travel related expenses. For enrollee Course Cancellation, refer to notes on course page.

If you cannot attend, please notify us no later than one week before your course begins, and we will refund your fee. Cancellations received after this date and no-shows are subject to a $150 administrative fee. You may enroll a substitute at any time before the course starts.